Email Us

NEWS

Contact Us

Installation and Maintenance of Ultra Thin Light Box

According to the opening method, ultra thin light box is mainly divided into flip open type, integral open type, zipper open type, magnetic suction open type.


Ⅰ. Installation and maintenance of the four-side flip open ultra thin light box


1. Determine the installation location and installation method (brick concrete wall, hanging marble, wood MDF, hanging gypsum board, insulating glass panel, double-sided suspension, etc.);


2. Unpack the slim light box and open the four sides, then take out the transparent panel, and finally place the ultra-thin light box in the installation position, and make sure the installation position is fixed;


3. Fix the light box and check the lighting of the light box at the same time, connecting the power cord, testing the light after power on, and fix the light box after it is in good condition, then hide the power cord, and add a decorative buckle slot if the power cord is exposed;


4. When cleaning and installing, it will leave dust and debris. It is necessary to tear off the light plate and the single-sided protective film of the panel, paste the picture around the panel with double-sided tape, and place the picture toward the inside of the lightbox;


5. After confirming that the picture is in place, flip the cover on the four sides, check and adjust the four corners of the ultra thin light box to be flat, tear off the protective film on the other side of the panel, clean the dust on the panel and the frame, and deliver it after the power is intact;


6. When maintaining the lamp and rectifier, first use an automatic screwdriver to remove the lamp cover groove, and test it with a new lamp of the same specification. If it is on, replace the lamp. Replace the old rectifier if it doesn't light up, plus the lamp cap slot.


Ⅱ. Installation and maintenance of the upper and lower integral opening of the ultra thin light box


1. Determine the installation location and installation method;


2. Open the package of the light box, first remove the whole opening automatic screw or forcefully open it, take out the upper cover, and then place the LED slim light box in the installation position, and confirm the installation position is fixed;


3. Fix the light box and check the lighting of the light box at the same time, connect the power cord, test the light after power on, fix the light box after it is in good condition, hide the power cord, and add a decorative buckle slot if the power cord is exposed;


4. Clean the dust left when the ultra thin LED slim light box is installed, tear off the light guide plate and the protective film on the inner side of the upper cover, paste the screen on the aluminum surface around the inner panel of the upper cover with double-sided tape, restore and fix the upper cover;


5. After fixing the upper cover, tear off the protective film on the other side of the panel, clean the panel and the frame of dust, power on in good condition, and deliver it for use;


6. When maintaining the lamp and rectifier, first use an automatic screwdriver to remove the lamp cover groove, and test it with a new lamp of the same specification. If it is on, replace the lamp. Replace the old rectifier if it doesn't light up, plus the lamp cap slot.


Ⅲ. Installation and maintenance of zipper flip open LED slim light box


1. Determine the installation location and installation method;


2. Unpack the light box, turn on the key or unscrew the button, pull it open, and then place the ultra thin light box in the installation position to make sure the installation position is fixed;


3. Fix the light box and check the lighting of the light box at the same time, connect the power cord, test the light when it is powered on, fix the light box after it is in good condition, hide the power cord, and add decorative buckle grooves to the exposed power cord;


4. When cleaning and installing, leave dust, tear off the light guide plate and the inner protective film of the upper cover, and paste the picture on the aluminum surface around the inner panel of the upper cover with double-sided tape, and restore and fix the upper cover;


5. After fixing the upper cover, tear off the protective film on the other side of the ultra thin light box panel, clean the panel and frame dust, and then deliver it for use after the power is in good condition;


6. When maintaining the lamp and rectifier, first use an automatic screwdriver to remove the lamp cover groove, and then test with a new lamp of the same specification. If it is on, replace the lamp. Replace the old rectifier if it doesn't light up, plus the lamp cap slot.


Ⅳ. Installation and maintenance of the suction cup magnetic strip open ultra thin light box 


1. Determine the installation location and installation method;


2. Unpack the light box, pull open the transparent panel with a suction cup, and then place the light box in the installation position to ensure that the installation position is fixed;


3. Fix the light box and check the lighting of the light box at the same time, connect the power cord, test the light when it is powered on, fix the ultra thin light box after it is in good condition, hide the power cord, and add a decorative buckle groove if the power cord is exposed;


4. When cleaning and installing, leave dust, tear off the light guide plate and the inner protective film of the transparent panel, paste the picture on the decorative surface around the inner side of the transparent panel with double-sided tape, restore and fix the transparent panel, check the debugging panel and aluminum match;


5. After fixing the transparent panel, tear off the protective film on the other side of the panel, clean the dust on the panel and the frame, and then deliver it for use after the power is in good condition;


6. When maintaining the lamp and rectifier, first use an automatic screwdriver to remove the lamp cover groove of the ultra thin lamp box, and test it with a new lamp of the same specification. If it is on, replace the lamp. Replace the old rectifier if it doesn't light up, plus the lamp cap slot.


Jinyu New Materials (Shanghai) Co., Ltd. is not only famous for producing the high-quality beach flag base, but also for manufacturing the top-level slim light box. If you need help finding the high-quality ultra-thin light box for your customers, please email us and let our experts guide you to the perfect solution.